More issues... sorry
Thread Starter
|
Novice
Joined: Sep 2011
Posts: 17
Likes: 0
From: Santa Clarita, CA
More issues... sorry
I know i have more to take than to give in this forum, but it will change soon enough i promise, but after searching, i cant find a vacuum diagram from my 97 sportster.
I have vacuum lines all over the place. one fro the fuel petcock that goes into a T and one line goes into the top of the carb, and the other runs back to an unknown location. and i found another at the bottom of the carb, that just hangs there, and i can't find a spot for it.
I have vacuum lines all over the place. one fro the fuel petcock that goes into a T and one line goes into the top of the carb, and the other runs back to an unknown location. and i found another at the bottom of the carb, that just hangs there, and i can't find a spot for it.
Road Captain
Joined: May 2008
Posts: 629
Likes: 1
From: Virginia Beach, VA
Have you picked up the shop manual yet? HD service manuals are actually really good, and should have exactly what you need. I would ask your dealer if they have any. The HD part number for your manual is 99484-97.
Thread Starter
|
Novice
Joined: Sep 2011
Posts: 17
Likes: 0
From: Santa Clarita, CA
i need to get it soon, just got some big expenses coming up with the new place, and the USMC bday coming up, is there an electronic version?
Last edited by Flippy02; Sep 22, 2011 at 04:06 AM.
Here ya go. This should help til you get a manual.
http://partsfinder.onlinemicrofiche....?Type=12&A=147
Kevin
__________________
DKCustomProducts.com
DKCustomProducts.com
Ultimate HDF Member
Joined: Mar 2008
Posts: 7,604
Likes: 38
From: Landrum, SC , elevation 986'
I know i have more to take than to give in this forum, but it will change soon enough i promise, but after searching, i cant find a vacuum diagram from my 97 sportster.
I have vacuum lines all over the place. one fro the fuel petcock that goes into a T and one line goes into the top of the carb, and the other runs back to an unknown location. and i found another at the bottom of the carb, that just hangs there, and i can't find a spot for it.
I have vacuum lines all over the place. one fro the fuel petcock that goes into a T and one line goes into the top of the carb, and the other runs back to an unknown location. and i found another at the bottom of the carb, that just hangs there, and i can't find a spot for it.
Thread
Thread Starter
Forum
Replies
Last Post
sappertattoo
General Topics/Tech Tips
1
Sep 19, 2009 04:34 PM
