Loose Front Indicator

Reply Subscribe

Thread Tools

Search this Thread

Jun 12, 2014 | 07:22 AM

jstcraig

Thread Starter

3rd Gear

Joined: Jun 2014

Posts: 7

Likes: 3

From: Australia

Loose Front Indicator

Anyone know how to dismantle the indicators ie remove front indicators from mounting point , would like to change away from the chrome but while I'm waiting for the black to arrive I need to tighten up the stock one, if there is a link or something with a few pics would be great.
Cheers

Jun 12, 2014 | 07:48 AM

Eisentreiber

Cruiser

Joined: Mar 2013

Posts: 207

Likes: 4

From: Germany

To release the indicator housing, loosen the Allen screw in the front of the hand lever bracket which holds the turn signal housing ball end stud.

Attached Thumbnails

Last edited by Eisentreiber; Jun 12, 2014 at 07:51 AM.

Jun 12, 2014 | 01:54 PM

cubalz

Road Captain

Joined: Nov 2007

Posts: 697

Likes: 42

From: Magnolia, DE

Quote:

Originally Posted by Eisentreiber

To release the indicator housing, loosen the Allen screw in the front of the hand lever bracket which holds the turn signal housing ball end stud.

This will work only if your turn signals are mounted under the hand controls. Some are mounted on the pinch clamps on the forks. If yours are like that, loosen the pinch clamp bolt (only do one at a time!) and remove the bezel standoff. To remove the standoff from the bezel, insert the correct sized allen socket on a ratchet using an extension and remove the bolt that holds together the chrome standoff and bezel.

Jun 12, 2014 | 06:19 PM

jstcraig

Thread Starter

3rd Gear

Joined: Jun 2014

Posts: 7

Likes: 3

From: Australia

Thank you for the replies,they are mounted under the controls, will check it out and see what I can achieve also thanks for the link but I'am not allowed to access it ??