New Member

Reply Subscribe

Thread Tools

Search this Thread

Mar 15, 2015 | 07:05 PM

Pemaw

Thread Starter

1st Gear

Joined: Mar 2015

Posts: 5

Likes: 0

From: South Carolina

New Member

Hello everyone. I am new to the forum and have a question. I have a 05 Ultra, went riding today and noticed the digital clock was not changing the time by itself. It displays the time, but only when I turn the power on to the radio and turn the power back off the clock will it display the correct time. Its like time had stopped. I can wait a couple minutes, turn on the power button to the radio and turn it back off, only then will it display the correct time. I tried leaving the power on to the radio to see if it will change time, but it does not change. What the heck could be going on??

Mar 15, 2015 | 07:10 PM

Lou'sUltra

Extreme HDF Member

Joined: Aug 2013

Posts: 15,256

Likes: 1,273

From: Ohio

Welcome from Ohio. Sounds like a built in excuse to be late getting back home! Good luck tracking that down.

Mar 15, 2015 | 08:04 PM

RickDM

Road Master

Joined: Jun 2014

Posts: 783

Likes: 1

From: Oxford, GA

Welcome to the Forum from Middle Georgia. I know someone here can help you.

Mar 15, 2015 | 08:45 PM

txm8de

Cruiser

Joined: Sep 2014

Posts: 180

Likes: 2

From: Texas

Welcome from CenTex.

Mar 15, 2015 | 09:11 PM

harleynut07

Novice

Joined: Mar 2015

Posts: 21

Likes: 0

From: maine

Welcome from the great state of maine

Mar 15, 2015 | 10:14 PM

Eunoterpsia

Road Captain

Joined: Dec 2012

Posts: 577

Likes: 20

From: Reno

While the bike is running, make sure the system is not in setup mode. Reset the icom and cb. Make sure both the icom and cb are off. Turn radio off. Turn radio on. Put radio FM. Now, before you turn off the bike, make sure the radio is on and in FM mode. Shut bike off and the time should start updating.