TBW diagram and connection
Thread Starter
|
Cruiser
Joined: Jun 2011
Posts: 138
Likes: 0
From: Alton Il
TBW diagram and connection
long story short after a move and divorce my wiring diagram for my TBW has gone missing. I imagine I was blind sided by the ex but that doesn't matter at this point.
Ive searched high and low and keep getting different photos with different wires
This is what I have from throttle
1. grey
2.purple
3. red
4 black
5 blue
6 brown
connected per Pin ID stamped on connector (left to right)
What I thought was the correct connector as it is the only one that matches up reads
1. black/grey
2. grey/white
3. red/grey
4. black/white
5. green/white
6. red/white
connected per pin ID stamped on connector and reads right to left
Issue arises when I look online to verify and it lists colors as
1. black/grey
2. yellow/purple
3. red/white
4. black.white
5. blue/green
6. brown/orange
Only thing I can come up with is they swithed wiring colors compared to the picture I found online or that I am on wrong connector.
Any help or guidance would be appreciated
Thanks
Jamie
Ive searched high and low and keep getting different photos with different wires
This is what I have from throttle
1. grey
2.purple
3. red
4 black
5 blue
6 brown
connected per Pin ID stamped on connector (left to right)
What I thought was the correct connector as it is the only one that matches up reads
1. black/grey
2. grey/white
3. red/grey
4. black/white
5. green/white
6. red/white
connected per pin ID stamped on connector and reads right to left
Issue arises when I look online to verify and it lists colors as
1. black/grey
2. yellow/purple
3. red/white
4. black.white
5. blue/green
6. brown/orange
Only thing I can come up with is they swithed wiring colors compared to the picture I found online or that I am on wrong connector.
Any help or guidance would be appreciated
Thanks
Jamie
Stellar HDF Member
Joined: Sep 2013
Posts: 3,492
Likes: 610
From: USA
long story short after a move and divorce my wiring diagram for my TBW has gone missing. I imagine I was blind sided by the ex but that doesn't matter at this point.
Ive searched high and low and keep getting different photos with different wires
This is what I have from throttle
1. grey
2.purple
3. red
4 black
5 blue
6 brown
connected per Pin ID stamped on connector (left to right)
What I thought was the correct connector as it is the only one that matches up reads
1. black/grey
2. grey/white
3. red/grey
4. black/white
5. green/white
6. red/white
connected per pin ID stamped on connector and reads right to left
Issue arises when I look online to verify and it lists colors as
1. black/grey
2. yellow/purple
3. red/white
4. black.white
5. blue/green
6. brown/orange
Only thing I can come up with is they swithed wiring colors compared to the picture I found online or that I am on wrong connector.
Any help or guidance would be appreciated
Thanks
Jamie
Ive searched high and low and keep getting different photos with different wires
This is what I have from throttle
1. grey
2.purple
3. red
4 black
5 blue
6 brown
connected per Pin ID stamped on connector (left to right)
What I thought was the correct connector as it is the only one that matches up reads
1. black/grey
2. grey/white
3. red/grey
4. black/white
5. green/white
6. red/white
connected per pin ID stamped on connector and reads right to left
Issue arises when I look online to verify and it lists colors as
1. black/grey
2. yellow/purple
3. red/white
4. black.white
5. blue/green
6. brown/orange
Only thing I can come up with is they swithed wiring colors compared to the picture I found online or that I am on wrong connector.
Any help or guidance would be appreciated
Thanks
Jamie
I just looked at the 14 Elec Diag Manual and you have the right connector 204A - Main Harness & 204B - Hand Controls. The only difference I see is your 2. purple is listed as 2. Violet in the Hand Control Connector 204B.
Thread
Thread Starter
Forum
Replies
Last Post
