Full Sac Question/Help
Thread Starter
|
Outstanding HDF Member
Joined: Nov 2005
Posts: 2,408
Likes: 2
From: Houston (Area)
Full Sac Question/Help
My buddy and I went to install my fullsac and when we looked at the new rear header pipe it has a place for a bolt on the pipe. He told me it looks like the spot for the O2 Sensor. My bike is a 2005 Road King Classic (no sensor) He told me to buy a bolt and a crush washer and I'd be ok.
I called fullsac and they are out until Thursday. Should I:
1) Buy the bolt/washer
2) Wait to hear from fullsac
I called fullsac and they are out until Thursday. Should I:
1) Buy the bolt/washer
2) Wait to hear from fullsac
Thread Starter
|
Outstanding HDF Member
Joined: Nov 2005
Posts: 2,408
Likes: 2
From: Houston (Area)
RE: Full Sac Question/Help
Right I think they sent me the kit for the 07. I didn't want to wait until Thursday to talk to someone, then send it back and have to wait for a replacement part. But additionally, I didn't want to "plug" it and it not work correctly and mess my something up in the long run.
Elite HDF Member
Joined: May 2006
Posts: 4,391
Likes: 10
From:
RE: Full Sac Question/Help
ya, I can see you dilema. Plug it and it may cause an exhaust leak. Plus, will having a bolt in your pipe cause any exhaust blockage? I would wait to put it on. Hopefully, you haven't taken off the old pipes and can still ride while you wait. Can't wait to see the finished product. You got the black rear cylindar pipe, right?
Thread Starter
|
Outstanding HDF Member
Joined: Nov 2005
Posts: 2,408
Likes: 2
From: Houston (Area)
RE: Full Sac Question/Help
ya, I can see you dilema. Plug it and it may cause an exhaust leak. Plus, will having a bolt in your pipe cause any exhaust blockage? I would wait to put it on. Hopefully, you haven't taken off the old pipes and can still ride while you wait. Can't wait to see the finished product. You got the black rear cylindar pipe, right?
Ultimate HDF Member
Joined: Sep 2006
Posts: 8,423
Likes: 2
From: Ellenwood, GA - The Ghetto Part
RE: Full Sac Question/Help
ORIGINAL: Manish_Hawg
Working on your bike is supposed to save you money but it made me spend more money.
Working on your bike is supposed to save you money but it made me spend more money.
[sm=bling.gif][sm=bustedsign.gif]
Trending Topics
Road Captain
Joined: Dec 2006
Posts: 748
Likes: 2
From: Minnesota
RE: Full Sac Question/Help
personally I would wait for the right pipe. But there is nothign wrong with plugging the 02 sensor hole either. Just make sure that the bolt doesnt go much past the threads on the 02 bung, and you are good to go.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Outstanding HDF Member
Joined: Nov 2005
Posts: 2,408
Likes: 2
From: Houston (Area)
RE: Full Sac Question/Help
personally I would wait for the right pipe. But there is nothign wrong with plugging the 02 sensor hole either. Just make sure that the bolt doesnt go much past the threads on the 02 bung, and you are good to go.
]
Elite HDF Member
Joined: May 2006
Posts: 4,391
Likes: 10
From:
RE: Full Sac Question/Help
"You are right but they won't be in until Thursday. If I don't ride something soon, I'm gonna run around on my mountain bike making motorcycle sounds."
Aren't you married? lol You waited this long, another week to get it done right won't kill you. Well, it might not.
These are my 18" bars I just had put on. I figure the labor cost me $300, but, if something went wrong, and it did (small brake leak), he would have to fix it and I would be scratching my head. Wish I had at least tried it myself, but it is done, and I love the finished product. Most everything else I have done myself, though, just not the bars.
[IMG]local://upfiles/12433/1F48EC3D178247EEBE6A37B46BA3A7CE.jpg[/IMG]
Aren't you married? lol You waited this long, another week to get it done right won't kill you. Well, it might not.
These are my 18" bars I just had put on. I figure the labor cost me $300, but, if something went wrong, and it did (small brake leak), he would have to fix it and I would be scratching my head. Wish I had at least tried it myself, but it is done, and I love the finished product. Most everything else I have done myself, though, just not the bars.
[IMG]local://upfiles/12433/1F48EC3D178247EEBE6A37B46BA3A7CE.jpg[/IMG]