Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

reflectors

Thread Tools
 
Search this Thread
 
Old Jul 3, 2007 | 04:19 PM
  #11  
FLHT's Avatar
FLHT
Outstanding HDF Member
Joined: Oct 2006
Posts: 2,340
Likes: 2
From: Omaha Nebraska
Default RE: reflectors

ORIGINAL: btefft

I want to be seen. I'll leave my reflectors on. I did remove the "safety sticker" for the saddle bag guards though.

Hack
I have replaced my reflectors with lights......better I think

 
Reply
Old Jul 3, 2007 | 05:12 PM
  #12  
Dax4800's Avatar
Dax4800
Advanced
Joined: Apr 2007
Posts: 96
Likes: 0
Default RE: reflectors

Heat gun and rubbing alcohol got mine off. Along with a little elbow grease.
 
Reply
Old Jul 3, 2007 | 05:25 PM
  #13  
diamondheadglide's Avatar
diamondheadglide
Intermediate
Joined: Jun 2007
Posts: 36
Likes: 0
Default RE: reflectors

just peeled mine right off and for the left over double sidded tapeIused a little goo-be-gone compounded with elbow grease, thenpresto, no more reflectors.

I do plan on adding more lights to increase viz at night
 
Reply
Old Jul 4, 2007 | 05:58 AM
  #14  
PapaTravis's Avatar
PapaTravis
Elite HDF Member
Joined: May 2006
Posts: 4,391
Likes: 10
From:
Default RE: reflectors

lol, the other day I was in the garage, pittering around on the bike. Ripped one of the reflectors off by hand. Went to the other side, and couldn't get the darn thing off. Guess I will try the fishing line trick this weekend. But, on one side, I am legal. LOL
 
Reply
Old Jul 4, 2007 | 07:16 AM
  #15  
Hardly Dangerous's Avatar
Hardly Dangerous
Road Captain
Joined: Dec 2005
Posts: 705
Likes: 3
From:
Default RE: reflectors

Dental floss then goo-gone.
 
Reply
Old Jul 4, 2007 | 09:55 AM
  #16  
NoTyme's Avatar
NoTyme
Cruiser
Joined: Jun 2007
Posts: 213
Likes: 0
From:
Default RE: reflectors

FLHT... Whats that on your front bumper?

I pulled the rubber bumper out and kept the chrome part installed... I think it looks better that way. (I hate yellow reflectors) [sm=shootshoot.gif]
 
Reply
Old Jul 4, 2007 | 11:52 AM
  #17  
Hagar the Horrible's Avatar
Hagar the Horrible
Outstanding HDF Member
Joined: Oct 2005
Posts: 2,002
Likes: 4
From: toontown
Default RE: reflectors

Not to rain on the parade, but in MA if the bike came with reflectors and you want a inspection sticker they had better be on th bike. Now, not all inspection stations are picky but you may want to NOT throw those reflectors away, just put them in a box in case you need to put them back on.
 
Reply
Old Jul 4, 2007 | 12:56 PM
  #18  
smknflms's Avatar
smknflms
Road Master
Joined: Nov 2006
Posts: 808
Likes: 4
From:
Default RE: reflectors

see...
https://www.hdforums.com/m_1533544/tm.htm
Later
 
Reply
Old Jul 4, 2007 | 01:18 PM
  #19  
Neggy ZRXOA 5248's Avatar
Neggy ZRXOA 5248
Stellar HDF Member
20 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2005
Posts: 3,183
Likes: 836
From: KMHT KFMY
Default RE: reflectors

Hagar is correct, in MA there is a enforcement directive that came from RMV telling inspection stations to fail any bike that does not have side reflectors. The same directive also covered lights, they have to be factory, or conform to DOT regs. Placement of the plate is also a hot issue.

I don't understand why you want to remove a device that might keep toy from getting T Boned pulling out of a parking lot, side street, or in a turn. When I got my soft lowers HD includes a set of reflectors for the forks since the stock reflectors are compromised when you but the covers on the crash bars. My bike has the reflector on the side of the front bumper that is part of my front fender.
 
Reply
Old Jul 5, 2007 | 01:08 PM
  #20  
DanDil's Avatar
DanDil
Cruiser
Joined: Apr 2007
Posts: 157
Likes: 3
Default RE: reflectors

I think most want to remove the reflectors because they look so cheap & cheesy. They look like an after thought. They look like the came off of my old schwinn.
 
Reply



All times are GMT -5. The time now is 06:38 AM.