When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Tried doing fork oil change and found this. Anybody know who makes it and or how much oil should go in. This is only on one side. Other fork looked like orginal oil. He might have replaced one fork.
Last edited by xcbullet; Jul 17, 2020 at 04:38 PM.
It hardly had any and bike ride was not as good as stock. I just put the same as other fork. It's full with the tube down some came out so probably a bit less. About ten ounce, seen that's what progressive monotube takes. Called PO he didn't know anything about it
Tried doing fork oil change and found this. Anybody know who makes it and or how much oil should go in. This is only on one side. Other fork looked like orginal oil. He might have replaced one fork.
On some models the forks are not the same from one side to another. This is the case here.
That's the Stock OE Cartridge (one side only) for 02-05 Touring Models with Fairing ... ie. Not Road King
10 oz. Cartridge side ... Oil Level 4.21" (107mm) from top of fork tube (fork collapsed, spring removed)
11.1 oz Conventional side... Oil Level 5.24" (133mm) from top of fork tube (fork collapsed, spring removed)
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
After market fork stuff? What is it?
