Grab bar removal?
Thread Starter
|
Road Warrior
Joined: Jan 2005
Posts: 1,495
Likes: 4
From:
Grab bar removal?
I think I saw it here in this forum a while back. It was a kit that helps to remove the grab bar on touring models. The grab bar is gone and the ends of the new brackets are threaded 1/4 20 to accept any kid of ornamentation,cap, or LED etc. Anyone know what Im talking about?
Road Captain
Joined: Jun 2007
Posts: 527
Likes: 3
From: Columbus GA / Phenix City AL
RE: Grab bar removal?
If you're talking about an 08 model, I can't add anything...buy my 2007 needed nothing extra to either install or remove the passenger grab bar. Just take off the seat, remove the nuts holding down the bar to the bracket. When it's gone, it appears just like it did before it was installed.
Tourer
Joined: Nov 2004
Posts: 471
Likes: 0
From: Dodge City, KS
RE: Grab bar removal?
Advanced
Joined: Apr 2005
Posts: 72
Likes: 0
From:
RE: Grab bar removal?
You can remove the bar and buy different covers from HD to clean up the gap left by the tube not being there anymore. Another option, which is what I did, was to buy some lights from J&P Cycles in Anamosa, IA. These are made for this application and have a 2 bolt bracket that bolts on behind your stock strut covers and can then be wired in to turn on with your running lights. They are called AutoGem shot gun marker lightsand can be seen on page 387 of the J&P catalog.
Thread Starter
|
Road Warrior
Joined: Jan 2005
Posts: 1,495
Likes: 4
From:
RE: Grab bar removal?
ORIGINAL: kt
Kevin,
Is this what your wanting?
https://www.hdforums.com/m_1626000/m...tm.htm#1626000
Kevin,
Is this what your wanting?
https://www.hdforums.com/m_1626000/m...tm.htm#1626000
Thread
Thread Starter
Forum
Replies
Last Post
RED_5
Touring Models
17
Feb 20, 2015 03:59 PM
