Enforcer wheels conversion

Reply Subscribe

Thread Tools

Search this Thread

Jul 12, 2023 | 03:57 PM

Bru59

Thread Starter

6th Gear

Joined: Jul 2023

Posts: 13

Likes: 2

From: Ohio

Enforcer wheels conversion

Hello , I am a new Harley rider and new to the forum. I have an 11 ultra limited . I picked up a nice set of enforcer wheels off flea bay. Can anyone tell me what I will need to install them . Like the size of the rotors , any special axles . Thanks a lot !

Jul 12, 2023 | 04:23 PM

jory434

Road Warrior

Joined: Jul 2012

Posts: 1,559

Likes: 522

From: San Angelo, Tx

They will fit. Is your bike ABS equipped? If so, you'll wanna make sure the Enforcers have ABS bearings. And vice versa.

Jul 12, 2023 | 04:26 PM

NoRegerts

Seasoned HDF Member

Joined: Mar 2011

Posts: 16,982

Likes: 9,059

From: Texas Hill Country

You'll need Enforcer rotors. Match the size of your stock rotors. They come in 11.5 and 11.8, I believe. Bearings (ABS or Non-ABS). Your axle will fit. Awesome wheels, it's gonna be nice.

Jul 12, 2023 | 04:28 PM

jory434

Road Warrior

Joined: Jul 2012

Posts: 1,559

Likes: 522

From: San Angelo, Tx

The Enforcer rotors will work fine on an '11 model. Same size. 11.8"

Jul 12, 2023 | 04:34 PM

Bru59

Thread Starter

6th Gear

Joined: Jul 2023

Posts: 13

Likes: 2

From: Ohio

That’s exciting , literally just switch them over . Yes these enforcer wheels have ABS bearings. So the spacers and axles are all the same . Can I take my rotors off my ultra limited and install in the enforcer wheels ?

Jul 12, 2023 | 04:37 PM

jory434

Road Warrior

Joined: Jul 2012

Posts: 1,559

Likes: 522

From: San Angelo, Tx

No the rotor bolt pattern is different. But the rotors will work just like the rotors you have on now. No problem at all. Ive done this exact conversion on a '13 model.