INSTALLING LEVERS
Thread Starter
|
Cruiser
Joined: Feb 2008
Posts: 137
Likes: 2
From:
INSTALLING LEVERS
i bought a manual before i tackled swapping out the levers but i cant find anything about changeing the levers themselves .
any pointers , especiall stuff that will keep me from screwing something up?
any pointers , especiall stuff that will keep me from screwing something up?
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,523
Likes: 3,953
From: Vermont
RE: INSTALLING LEVERS
Pop the retaining ring on each one, pull out the clevis pin and the levers come out. With the clutch you can collapse the adjuster at the downtubes first and then pull the clevis pin and remove the clutch cable from the lever. After lever is installed, readjust the clutch cable. With the brake lever, as mentioned, just be careful of the brake switch.
Thread Starter
|
Cruiser
Joined: Feb 2008
Posts: 137
Likes: 2
From:
RE: INSTALLING LEVERS
ORIGINAL: TexasRedneck
It'd be easier if ya took the time ta tell us what bike yer workin' on.
Hate ta give ya instructions fer a Vespa...
It'd be easier if ya took the time ta tell us what bike yer workin' on.
Hate ta give ya instructions fer a Vespa...
2007 eglide classic
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 46
From: Roswell, GA
RE: INSTALLING LEVERS
DADAWG, for future reference the clutch lever removal is covered in the portion of the manual on clutch cable adjustment; Sec. 2.22 in my '04 SM. Your removal will be different because of the starter interlock switch (similar to the front brake switch in the right lever).
Thread
Thread Starter
Forum
Replies
Last Post
DresserDude
2014-2024 Touring Models
11
Jan 5, 2016 03:51 PM
jbg
Softail Models
9
Nov 6, 2010 11:48 AM
