Electrical problems
Thread Starter
|
Stage III
Joined: May 2008
Posts: 3
Likes: 0
Electrical problems
Hi all, hope to get some help. 1st thing first I messed up! with a light tester I wanted to see if there was power coming in where there is a quick connect for adapting additional lighting to the front. Well there are thre wires and the first on I tested it gave me a spark and I saw that my instruments ( trip meter only ) went blank also my directionals. brake light. But it did start so I left it alone until today When I went to start nothing happened no clicks. I have power to the parking lights only also no horn. Now I check my fuses ( 15 amp) and everthing seems fine and the 40 amp also. Now when I disconnect my starter relay and plug it back in its making a clicking sound but my brake relay no sound at all. Any Ideas before I take it in the shop. Thanks Pete
Cruiser
Joined: Dec 2007
Posts: 118
Likes: 2
From: Kemp, TX 50 mi. SE of Dallas
RE: Electrical problems
Wish I could help you pp but not able to. Some of these guys can probably help, but it would be beneficial to know what can of bike they are dealing with, :-)
Thread
Thread Starter
Forum
Replies
Last Post
mikey0086
Ignition/Tuner/ECM/Fuel Injection
3
Oct 2, 2007 01:26 AM
