Update on Homemade Stabilizer!!!
Thread Starter
|
Former Sponsor
Joined: Jul 2008
Posts: 461
Likes: 0
From: Bend, Oregon
Update on Homemade Stabilizer!!!
Here's the original post if you haven't seen it:
https://www.hdforums.com/forum/touring-models/278775-homemade-touring-stabilizer-pictures.html
- Just an update for all the guys that have PM'd me on these. I am having 25 made up initially and should have them ready to go in a few days.
- I did add 4 oblong vent holes to the bottom plate per someones suggestion on here to release more oil pan heat. I am also having the 5/8" spacers between the bottom-plate and the oil pan welded to the bottom-plate so the whole oil pan takes the torquing stress and not just the stainless bolts bolting it on. This was suggested by the engineer I hired to look this stabilizer over for production.
- I will have a website where you can get the downloadable Plans/templates in a .pdf format for $39, and Black powder-coated ones for $195 shipping included. I will also be selling the hardware kits for you guys making your own who don't want to waste a 1/2 tank of gas finding all the right hardware.
- When these are ready to sell, I will become a vendor on this forum to not cheat the system and be legit.
- This will be a completely bolt on kit, and will install in about 20 minutes. They will fit the '93-'08 Road Kings, Road Glides, Street Glides, Ultra's and Police Models. Please PM me if you want me to put your name on the list for one. If you have already sent me a PM, I will be in contact with you! Thanks guys. Look forward to working with you.
Aaron
https://www.hdforums.com/forum/touring-models/278775-homemade-touring-stabilizer-pictures.html
- Just an update for all the guys that have PM'd me on these. I am having 25 made up initially and should have them ready to go in a few days.
- I did add 4 oblong vent holes to the bottom plate per someones suggestion on here to release more oil pan heat. I am also having the 5/8" spacers between the bottom-plate and the oil pan welded to the bottom-plate so the whole oil pan takes the torquing stress and not just the stainless bolts bolting it on. This was suggested by the engineer I hired to look this stabilizer over for production.
- I will have a website where you can get the downloadable Plans/templates in a .pdf format for $39, and Black powder-coated ones for $195 shipping included. I will also be selling the hardware kits for you guys making your own who don't want to waste a 1/2 tank of gas finding all the right hardware.
- When these are ready to sell, I will become a vendor on this forum to not cheat the system and be legit.
- This will be a completely bolt on kit, and will install in about 20 minutes. They will fit the '93-'08 Road Kings, Road Glides, Street Glides, Ultra's and Police Models. Please PM me if you want me to put your name on the list for one. If you have already sent me a PM, I will be in contact with you! Thanks guys. Look forward to working with you.
Aaron
Last edited by AaronOregon; Oct 9, 2008 at 09:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
