I just finished the superflow dual conversion on my road king and now I need to figure out what size heat shield to buy in order to cover the straight section leading into the right side muffler. Has anyone done this and know which length works best? Also, if you have a link to an inexpensive place I can buy one. I would appreciate that also.

Thanks
RB

 

I don't know if this will help but I did the fullsac conversion to my standard and all I had to do was switch the right side heat shield around to re install it. It still has a slight gap but I believe Kuryakn has one that's much longer and also in the Dennis Kirk catalog in the section after the mufflers has a few listed.

Scott