23" teaser "UPDATED With Pictures"
Thread Starter
|
Road Master
Joined: Mar 2008
Posts: 1,140
Likes: 1
From: Cali
yea I've seen those, but you still need to cut and weld... if you go try to sell your bike down the road, that might work against you for cutting into the frame.. JMHO
The kit is sharp!! I still haven't seen it in person but been talking to Eric and Zack from Ness and from what I hear it's the PERFERCT solution, kit retails for $2300 plus $100 for the new fairing bracket that has been modified to correct the angle on the fairing.
Average rake cost from Shoppe & Yaffe is around $3000 to $3500 so is definatelly cheaper and easir to do, and if you get tired of it or want to go back to stock it's as simple as changing out the trees.
The kit is sharp!! I still haven't seen it in person but been talking to Eric and Zack from Ness and from what I hear it's the PERFERCT solution, kit retails for $2300 plus $100 for the new fairing bracket that has been modified to correct the angle on the fairing.
Average rake cost from Shoppe & Yaffe is around $3000 to $3500 so is definatelly cheaper and easir to do, and if you get tired of it or want to go back to stock it's as simple as changing out the trees.
Pork Chop,
It was a cut off, re-weld kit that allows you a solid shaft that slides back into your frame for stability and also had a window for your VIN to be visible after install.
The rake kit in the triple trees sounds good, whats the cost on it?
Your tail section looks good too.. I went this route, now thinking of RE-doing for biketoberfest just for something to do.. That's me in daytona beside my buddy's custom 98 ultra classic
JD2007ROADKNG
It was a cut off, re-weld kit that allows you a solid shaft that slides back into your frame for stability and also had a window for your VIN to be visible after install.
The rake kit in the triple trees sounds good, whats the cost on it?
Your tail section looks good too.. I went this route, now thinking of RE-doing for biketoberfest just for something to do.. That's me in daytona beside my buddy's custom 98 ultra classic
JD2007ROADKNG
Thread Starter
|
Road Master
Joined: Mar 2008
Posts: 1,140
Likes: 1
From: Cali
siiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiick!!! did you go with the FatKatz fender like I told you?
are you just doing the 7 deg. trees or chopping it also?
are you just doing the 7 deg. trees or chopping it also?
Last edited by Pork-Chop; May 13, 2010 at 09:05 AM.
Cruiser
Joined: Jan 2010
Posts: 104
Likes: 0
From: MN
I went with a RWD front fender, and I am going to install a set of Tri Glide trees as soon as they show up. I didnt want to cut the frame an a new bike and the tri glide trees are about $400 retail so that is what I am going to try. Hopefully they will show up this week so maybe I can put it together this weekend!
Thread Starter
|
Road Master
Joined: Mar 2008
Posts: 1,140
Likes: 1
From: Cali
I went with a RWD front fender, and I am going to install a set of Tri Glide trees as soon as they show up. I didnt want to cut the frame an a new bike and the tri glide trees are about $400 retail so that is what I am going to try. Hopefully they will show up this week so maybe I can put it together this weekend!
Thread
Thread Starter
Forum
Replies
Last Post
WanaRyd Wheels
Vendor For Sale Classifieds
9
Oct 22, 2020 01:01 PM
