When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Touring guys and gals, I recently put Road King shocks on my 2010 Wide Glide and have to air them up about every 3-4 hours. Ive read that this is pretty common with the RK shocks. All the fittings seem to be tight, but I think the pressfit lines are just not a great seal, even though I bought all new ones prior to installing them. Is this just something Im gonna just have to deal with or is there a better way to get these things to seal up?
When you did the install, did you cut back the ends of the tubing a little bit first?
To find out exactly where the leak is, take a LITTLE bit of dish-washing detergent mixed in a squeeze bottle of water and saturate each fitting and surrounding area and do the same on the shock inlet fitting.
The leak will blow bubbles for ease of reference.
Were the RK shocks brand new or second hand? May be a leak past the shock seals??
i was going to suggest the windex bottle with a bit of dishwashing soap mixed with water so you can a similar air leak test as you'd do with a tire, but v2evo beat me to it.
I changed out my 09 SG shocks 12" for a set of take off 13" from a classic and when I first put them on they would not hold air either, I again pushed the release button for the airlines and removed the lines and checked the quick release to see how far it would stick out and then reinstalled the airlines farther into the joint or connection and made sure the quick release was locking and holding the lines and I have not had a problem since. Using the spray bottle with and light soapy mixture is a good indicator if the lines are leaking by looking for small bubbles coming out of the airlines as previously suggested. Good Luck!
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.