10 vs 13 cyclesmiths Streetglide

Reply Subscribe

Thread Tools

Search this Thread

Jul 5, 2010 | 03:59 PM

#11

Maddogs700srx

Cruiser

Joined: Feb 2006

Posts: 143

Likes: 0

From: New Hampshire

I also have the 13's. I prefer the look of them bieing closer to the fairing. I feel the 13's blend in. My bud has 10's and they aslo look good. His are a bit more effective in colder weather. I personally think the 16's are too tall. They look like Deer antlers sticking above the fairings. (imo) LOL

Jul 5, 2010 | 04:24 PM

#12

highwayman1224

Road Master

Joined: Mar 2008

Posts: 1,107

Likes: 9

From: Goodyear, Az

Quote:

Originally Posted by slack20

highway are those priced like yaffe bars

They're about $25 more. $400.

Jul 7, 2010 | 09:30 AM

#13

darrinfish

Thread Starter

Cruiser

Joined: Mar 2010

Posts: 138

Likes: 0

From: Clinton Tennessee

Thanks for all the pics I think I am going to go with the 13. Last 2 questions I have is 1st do I have to get any extensions for the throttle by wire and 2nd since the bike has ABS do I have to get a special brake hose, also any measurements on clutch cables and the brake hose would be appreciated.

Jul 7, 2010 | 09:50 AM

#14

PistonPuller

Ultimate HDF Member

Joined: Feb 2006

Posts: 5,190

Likes: 5

From: Eastern Washington

Quote:

Originally Posted by darrinfish

No need to extend any wires with 13". Throttle and signals can be rerouted under the radio which is what I did. If you want to run them to the same place they are now, you will need extensions. TBW has a green connector about 3" in from the throttle. I taped mine up good before running it thought he wire, but you can buy a one piece that doesn't have the connector. +6 on lines and cables. Make sure you buy the right brake lines for ABS bikes. hdbikeparts.com is where I got my cables and lines.