2005 Road King rear cylinder not firing
Thread Starter
|
Club Member
Joined: Mar 2010
Posts: 1,035
Likes: 0
From: Arlington, Washington
2005 Road King rear cylinder not firing
Ok my brothers 2005 Road King went on the fritz over the weekend, for some reason the rear cylinder quit firing, he's replaced plugs, wires, coil, intake gaskets, still no go, there is electricity to the plug, there is compression so any ideas?
Thread Starter
|
Club Member
Joined: Mar 2010
Posts: 1,035
Likes: 0
From: Arlington, Washington
Lol, yes she is mesmerizing, weirdest thing on his bike, Iam stumped, new plugs, wires, coil and new intake gaskets, he's seems to be getting compression on both cylinders but not officially tested (just a finger over the hole) he's also running a thundermax with auto tune
Elite HDF Member
Joined: Mar 2006
Posts: 4,722
Likes: 5
From: Biddeford, Maine
Put the stock ECM back in and see if it fires up that rear cylinder.
But if you say it's getting spark, fuel, and has compression...............then it should be working fine.
What makes you think it's not firing?
Steve
But if you say it's getting spark, fuel, and has compression...............then it should be working fine.
What makes you think it's not firing?
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Dynageo
General Topics/Tech Tips
4
Apr 2, 2016 10:37 PM
