Big problem wit LED's need help
Thread Starter
|
Cruiser
Joined: Feb 2010
Posts: 123
Likes: 0
From: Lacey Washington
Big problem wit LED's need help
I have installed the Kuryakyn Deluxe Panacea Smoke Taillight model # 5401 with the Bullet Light Rear Turn Signal Bar model # 2098. I have also installed a Badlands Load Equalizer III, this is inline with the Kuryakyn control module. I have had numerous problems but the latest go like this;
1) Put bike in "N", and back down driveway into street, light goes out, the cause is a blown fuse. (Lighting Fuse, position 12, 15A).
2) I know this sounds stupid but if I don't back up the lights will work fine for a day or two.
3) Or if I back up with all the power off, I am ok.
HELP!!
1) Put bike in "N", and back down driveway into street, light goes out, the cause is a blown fuse. (Lighting Fuse, position 12, 15A).
2) I know this sounds stupid but if I don't back up the lights will work fine for a day or two.
3) Or if I back up with all the power off, I am ok.
HELP!!
Thread
Thread Starter
Forum
Replies
Last Post
hamnhog
Ignition/Tuner/ECM/Fuel Injection
9
Apr 7, 2008 07:45 PM
