Front turn signal help needed!
Thread Starter
|
Cruiser
Joined: May 2008
Posts: 246
Likes: 3
From: New Jersey
Front turn signal help needed!
Long story short, I went to go help my dad with his 03 FLHT. He is putting bullet front turn signals. When I got there, he all the pins out of the connecting harness. I tried doing some searching on here but I could not find nothing. The wires are as follows:
Left:
Black
Purple
Blue
Right
Black
Purple
Blue
I guess the six-pin connector would look like this:
1 - Black, 2 - Purple, 3 - Blue (Left turn signal)
4 - Blue, 5 - Purple, 6 - Black (Right turn signal)
When I did this the right signal would work, but with no running light. Any help would be great!
Left:
Black
Purple
Blue
Right
Black
Purple
Blue
I guess the six-pin connector would look like this:
1 - Black, 2 - Purple, 3 - Blue (Left turn signal)
4 - Blue, 5 - Purple, 6 - Black (Right turn signal)
When I did this the right signal would work, but with no running light. Any help would be great!
Thread
Thread Starter
Forum
Replies
Last Post
