inner cap fairing
Thread Starter
|
Stage III
Joined: Aug 2008
Posts: 3
Likes: 0
From: yakima
inner cap fairing
Hello all, I thought I could throw out a question to my Harley guru friends.
Problem , I am building a softail/bagger . I have purchased a fairing from a flht, and inner cap to boot.
I have bought a international switch house module, everything needed.
Question," it seems that the module does not fit properly, in the inner cap fairing, so here it is.
Is there more than one style of inner fairing cap that only accept's international switch module?.
appreciate the input.
Ty
Craig:
Problem , I am building a softail/bagger . I have purchased a fairing from a flht, and inner cap to boot.
I have bought a international switch house module, everything needed.
Question," it seems that the module does not fit properly, in the inner cap fairing, so here it is.
Is there more than one style of inner fairing cap that only accept's international switch module?.
appreciate the input.
Ty
Craig:
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,524
Likes: 3,953
From: Vermont
The plate that goes around the ignition switch and locks into the inner fairing cap is different for the HDI switch than the US, but not the fairing cap itself. The HDI switch plate is pn#71422-03 and the US plate is 71662-03A
Thread Starter
|
Stage III
Joined: Aug 2008
Posts: 3
Likes: 0
From: yakima
ty I appreciate it . It's good to know that all the inner fairing caps are the same, as for the switch name plate I used ur PN to order a new one. Looks like they had ordered the wrong one.. I really appreciate your info, and I thank you for such a fast response... Stay up on 2, and have a great day
Thread
Thread Starter
Forum
Replies
Last Post
