254e cam
Road Captain
Joined: Apr 2011
Posts: 529
Likes: 1
From: Illinois
I like mine I got them in a 11 Limited only 280 miles havent dynoed it yet hope to get that done in the next month or so.good low to mid range cam,in my opinion good bagger cam, had 255's in a 103 build on my 09 ultra they are similar to them.
Tourer
Joined: Aug 2009
Posts: 304
Likes: 8
From: Lugoff, SC
Had a 103" build done on my 09 w/the 254e. So far, I really like the cam and build. Only have about 350 miles on the new build, waiting to get a few more miles in before the dyno. I did a lot of searching for information on the 254e before I decided on it and talked to the parts and build guys. All of which agreed, the 254e is a VERY GOOD cam. Couldn't find any negative info on this cam and even saw reference to it being comparable to Woods and Andrews cams at places (wish I had saved that site in my favorites).
5th Gear
Joined: Nov 2010
Posts: 9
Likes: 0
From: Melbourna
just letting you's know i put a 254e in a 09 FXDB 103 , mild port forged hi comp S@S aircleaner S@S slipons and a dyno tune as there was no canned program here in australia and pulled 102 H/P and 109tq can try to email dyno if want .. tq at 100 at @2600 and at 5250 comes back to 100tq and at 5250 102 H/Pto 6100 just a bit more than a 255 .. pete from australia
Thread
Thread Starter
Forum
Replies
Last Post
