what da hell does- no rsp - mean? i just got it back today for an abs code, now after i got home, when i turn the switch to acc my rear lights are on? it she telling me something new? it didnt do that before. oh and i HAD cruise when i left the dealer, but stopped to hang with wifey and on my home i hit the crusie set and...nuttin.

 

It means "NO Response". Take it back to the dealer.

 

Does your bike have ABS? If not then you will get no response for diagnostics on the ABS system.

 

has abs, it seems to be fine after the 70 mph panic stop i did on my way home! but my tail lights stay lit up when i put it in the acc position...shouldnt do that. and my cruise stopped working,...
is there a list some where on codes and what they mean?

 

thanks, with no cruise and the tail lights lit up with the switch in the acc position, sumptin not right.

 

Brake switch will cause that

 

i dont remember them working with the switch in that postition? thanks, guess im going back to the dealer in the morning...sucks *** since i just got it back after a week in the shop...

 

"No Rsp" will also appear if the run/off switch is in the off position while checking codes.

 

tail lights issue- brake relay, could hear it crackling and i pulled it out and put some dielectric grease on the contacts- problem solved

cruise- unknown

when i pull the codes up, start switch in the run position, it shows 'none' first, then when i hit the odo button again it runs a 'pn-00000-0000' ( ex. on the numbers)? does this for a couple of them.

any ideas?

 

If your brake light was stuck on and now its fixed try your cruse and see if it works.....

Trucky911