Turn Signal Problem
Thread Starter
|
Intermediate
Joined: Jun 2008
Posts: 48
Likes: 0
From: Grand Forks, ND
Turn Signal Problem
Well to start the story I took apart both front turn signals (which worked just fine) to have them powdercoated. I put them back together and now the running lights do not work, but both turn signals do work. The bike also has B1121 and B1122 codes (turn signal failure L&R). I have Custom Dynamics LEDs installed with a biketronics equalizer, and the only thing I have noticed that is wrong is 3 of the individual LED's are no longer working in the left signal cluster. I did ride the bike without the turn signals installed for a few days as it was 70+ degrees, in North Dakota, in March. That doesn't happen... ever! So I was "forced" to ride. Is there any way this could have caused a problem in the TSM? Any help is greatly appreciated!
Mike
Mike
Thread
Thread Starter
Forum
Replies
Last Post
ultravista
Ignition/Tuner/ECM/Fuel Injection
23
Jan 16, 2006 09:50 PM
