Skull levers for '08 bagger
Thread Starter
|
Stage I
Joined: May 2012
Posts: 1
Likes: 0
From: Portland, OR
Skull levers for '08 bagger
Just joined up and looking forward to being a forum member. Learned alot from you guys on here recently and figured if there was an aswer to my question then ya'll were the people for me.
I've got a 2008 SG and looking for the skull tipped brake/clutch levers. I've found them up to 2007, but apparently the '08s have a different setup?
Trying to avoid the Kuryakyn Zombie levers if possible and just go with the skull tipped ones that HD used to make.
Any suggestions? Thanks.
I've got a 2008 SG and looking for the skull tipped brake/clutch levers. I've found them up to 2007, but apparently the '08s have a different setup?
Trying to avoid the Kuryakyn Zombie levers if possible and just go with the skull tipped ones that HD used to make.
Any suggestions? Thanks.
Road Captain
Joined: Jan 2009
Posts: 739
Likes: 2
From: St. Louis
Technically, I believe they'll bolt on, but they lack the protuberance necessary to activate the switch that operates the clutch interlock feature. The short version...if you leave it in gear and try to start it without pulling the clutch lever in, it'll crank and the bike will lurch forward.
Tourer
Joined: Aug 2011
Posts: 334
Likes: 0
From: houston
Not many options, I chose to go with Paul Yaffe levers. Send them yours they machine them down to a taper so the ball is gone then they drill them out you can get them polished or powdercoated black for about $150.
Tourer
Joined: Aug 2011
Posts: 334
Likes: 0
From: houston
Those won't work on a throttle by wire bike, choices are VERY limited unlike all the other models.
Thread
Thread Starter
Forum
Replies
Last Post
maineultraclassic
Want To Buy Motorcycles/Parts/Accessories
10
Apr 2, 2022 01:13 AM
skos
General Harley Davidson Chat
17
Oct 14, 2008 09:55 PM
