lets see your flag mounts
Outstanding HDF Member
Joined: Jan 2011
Posts: 2,590
Likes: 31
From: Western Illinois, land of bad roads, and corrupt politicians
Here's a shot of mine before I got it done. I haven't taken any pictures of the finished mount.
It's aluminum plate and u bolts on a tall QR backrest. The pole mounts are HF antenna mast clamps. The pole is PVC with an aluminum tube and oak dowel inside.
I have had this setup up to 70 mph with no problem.
I have the 3x5 flag cut and hemmed into a cavalry guideon shape to reduce drag, and that annoying snap and crack that the flag makes at speed. The shape also reduces the shredding that happens at high speeds.
It's aluminum plate and u bolts on a tall QR backrest. The pole mounts are HF antenna mast clamps. The pole is PVC with an aluminum tube and oak dowel inside.
I have had this setup up to 70 mph with no problem.
I have the 3x5 flag cut and hemmed into a cavalry guideon shape to reduce drag, and that annoying snap and crack that the flag makes at speed. The shape also reduces the shredding that happens at high speeds.
Last edited by shooter5074; Sep 18, 2012 at 10:36 AM.
Seasoned HDF Member
Joined: Jun 2012
Posts: 6,133
Likes: 2,526
From: CT/FL
I wish I could remember where I bought mine - two plastic flag mounts with nice 11x16 cloth flags for about $50 or $60. They mount with zip ties to the sissy bar. The only drawback is my girlfriend says they sometimes blow against her neck/back when we're riding.
Last edited by Joe12RK; Sep 18, 2012 at 11:19 AM.
Thread
Thread Starter
Forum
Replies
Last Post
