Connector help please
Thread Starter
|
Road Captain
Joined: Jan 2006
Posts: 500
Likes: 2
From: Wichita Falls TX
Connector help please
Could have posted in electrical but needing FAST help hopefully to finish this project.
I have a namz hotbox to control the led's that are now my rear run, turn and brake. The hotbox came with this connector....
The taillight wiring that I cut off of my bike has this connector......
Can I simply match the wire colors and all will be good? It appears both connectors have the exact color wires, just in different locations. I know I can probably get a adapter but I'r ready to ride.....
Thanks
I have a namz hotbox to control the led's that are now my rear run, turn and brake. The hotbox came with this connector....
The taillight wiring that I cut off of my bike has this connector......
Can I simply match the wire colors and all will be good? It appears both connectors have the exact color wires, just in different locations. I know I can probably get a adapter but I'r ready to ride.....
Thanks
Cruiser
Joined: Feb 2012
Posts: 202
Likes: 4
From: new york
connector
i just did a fender change on my ultra from a streetglide and ran across the same thing.the wires are the same I simply took the plug apart and pulled the pins and changed the connector out.I purchased a new connector from harley so I retained my original connection and left my original fender intact.
Thread
Thread Starter
Forum
Replies
Last Post
commandozx
Sportster Models
12
Jul 12, 2012 12:40 PM
Dr. Frank
Ignition/Tuner/ECM/Fuel Injection
2
Jan 26, 2006 12:04 AM
