Hooked up my new PowerVision and went for a ride today. did some data logging but thought the gauges on it would work while riding. Like the tach and speedo gauges on the unit. Is there some way to make them show RPM or speed while your riding? Or maybe cylinder head temps? Thanks for any help.

 

Yes you can have gauges shown on the PV while riding. Go to the Dynajet website and download the PV maunal. It will show you how.

 

You will need to configure the individual gauge channels which only takes a few seconds. Start by choosing the gauge screen you would like to display and simply touch the image on the screen and it will bring up a list of available channels for that gauge, choose the signal you would like to display and it allows you to configure it, if you desire you can also set up high/low limits, different colors and warnings etc., when setup just hit OK and you are all set.

 

I noticed my powervision connector has 4 female openings in it and my data connector on the bike has only 3 actual pins the 4th one is open no pin. This is a gray connector under left side cover with a black top? 2009 FLHX Street Glide

 

Or- Open the PV folder on your computer, Or-open WinPV on your computer , click- Help, click- Contents, click- Working with Power Vision, open the menus alot of info. in there.

 

YEA!! I tried it again. After choosing the gauges I wanted I then touched the gauge on the powervision screen and it gave me the signal options and worked like I expected. Thanks Jamie. ))