From abs to non abs wheels
Thread Starter
|
Road Captain
Joined: Sep 2008
Posts: 620
Likes: 2
From: Midwest City, OK
From abs to non abs wheels
Ok fellas I ran into a good deal on a set of Agitator wheels that are abs. My question is do I just change the bearing from abs to non or do I also have to change the spacer behind the bearing?
Thx in advance,
Thx in advance,
Seasoned HDF Member
Joined: Aug 2007
Posts: 39,683
Likes: 2,118
From: Central, Ca.
If putting an abs wheel on a non abs bike all you need is the bearing change, I changed both bearings so they would be fresh at the same time but you could get by with just one, spacers are already correct for the non bearings on a non abs bike
Last edited by DPete; Dec 22, 2012 at 12:56 PM.
Thread Starter
|
Road Captain
Joined: Sep 2008
Posts: 620
Likes: 2
From: Midwest City, OK
Thx for the replies. The local indie had stated that it only mattered if you went to a abs bike. Turns out he was wrong as they will not fit. If rims have abs in them the bearing or bearings must be replaced to a non abs bearing or they will not fit.
It's solved and rolling down the road as we speak.
It's solved and rolling down the road as we speak.
Thread
Thread Starter
Forum
Replies
Last Post
