I am new to the site, but have been watching it for a while. i am gotten a lot of good tip from you guys. That brings me to my question. Has anyone moved the stock ignition switch from the lower fairing cap? I was thinking about putting it where the cigarette lighter is or where the horn is mounted. I am open to ideas.

 

I've never seen anyone do it but why would you want to? Just curious.

 

Because I hate the way it looks on the fairing cap. I am doing some custom work, and need to find a place to put a PSI gauge. What I am going to do is move the ignition switch to either where the horn is or where the cigarette lighter is. I am getting rid of the horn, and going to run a push button right off the starter. I will then drop a Dakota Digital 1 7/8" PSI gauge in the fairing cap when OE switch was for my air ride. I am going to use the start button on the handlebars for air up, and use the horn button for air down.

 

I want to move the switch as well and the cigarette plug area is not a bad idea now to figure out how to do it

 

yeah man, its been done quite a bit. as much as i dislike sinister, they make a kit

 

mount it through the front of one of the side covers?

 

What about the steering lock? Guess you do away with it

 

Why don't you mount it like an FLH on the gas tank?

 

do you have a link i tried searching his site and dont see it

 

It seems like you're talking about 2 different concepts; 1) Relocating the ignition switch and 2) Relocating the start button function. Why don't you just run a car type key ignition in the cigarette lighter opening and kill 2 birds with 1 stone.