I have a 2010 Street Glide that I just installed Woods Tw-222 cams. I also have a D&D pipe and a Zipper's Max flow air cleaner. I got a new map for my Power Vision from fuelmoto and flashed my ECM. The bike started up and sounds great but now I have a red key shaped warning light on. The manuel says this light is related to the security system but I don't have the security system on my bike. Any ideas?

 

Here's what I found after a quick google search.

http://www.fixya.com/motorcycles/t12...curity_signals

The one about the battery sounds promising

 

Check fuses. I had the red key light staying on it was as simple as a blown fuse, good luck..

 

Key light on mean you threw a code. Do a code search and it will tell you the problem

 

yeah, pull up the codes (follow the manual or the instructions in this site) and then let us know what's goin on and we might can help

 

Thanks for the info. I will pull the codes and see what I find.

 

Ijust pulled the DTC codes from my bike and they are: b1155 and U1016. I have also noticed that the bike will not start in neutral unless the clutch is engaged

 

B1155 Neutral Switch Input Short to Battery

U1016 Loss of ECM Serial Data

 

you're going to need to tell us the steps you took while installing everything

 

Sorry I haven't been back on to follow up with this but I have been in contact with Jamie at fuelmoto and he has been giving me a few things to try. I follow manual procedure for the cam install and power vision's procedure for the new fuel map install.