When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have them and scrape the boards on maneuvers like a boulevard u-turn, but it would take a lot of scraping to hit the actual mounts on the ground. I love 'em!
Have the HG 1" extensions with the HD 1" forward boards on my Limited. Several people commented on the boards touching ground easier. Mine have touched but not often as I'm not that aggressive a rider. I was even surprised last year they did not touch down while running the Dragon at near speed limit curves. I have noticed that when the boards touch now the actual brace under the board is what touches ground and it is not made to pivot like the board.
I bought some of those floorboard extensions to install on my 05 Ultra. They seemed to work as advertised, but when I went for a ride on MTN two lane "twisties", the extensions allowed my floor board mounts, not the boards, but the mounts themselves to contact the pavement on a righthand corner, lifting the bike up and forcing me over into the left lane. Lucky for me and the wife that there was not a car coming thru the corner in the opposite lane or we would have had a headon. Needless to say as soon as we got back home those "extensions" came off. If you ride your dresser agressively at all, and like to really lean into your turns, those extensions are NOT a good idea IMO.
Last edited by roadster02; Mar 25, 2013 at 06:25 PM.
I have a question about the HG extensions. I bought them and installed them on my '10 FLHX. While in the mountains I dumped my bike on a tight turn. One of riders swears that it is because of the extensions; did not allow my bike to lean far enough to make the turn and just pivoted on the extension. Does anyone have an opinion on this theory? I know the HG website says it only decreases the turn radius by a small amount but could that "small amount" be enough to pivot a bike?
I bought some of those floorboard extensions to install on my 05 Ultra. They seemed to work as advertised, but when I went for a ride on MTN two lane "twisties", the extensions allowed my floor board mounts, not the boards, but the mounts themselves to contact the pavement on a righthand corner, lifting the bike up and forcing me over into the left lane. Lucky for me and the wife that there was not a car coming thru the corner in the opposite lane or we would have had a headon. Needless to say as soon as we got back home those "extensions" came off. If you ride your dresser agressively at all, and like really lean into your turns, those extensions are NOT a good idea IMO.
That experience must have left you with a huge pucker factor! I've never had to lean my bike over that much that I touched the boards or mounts. I have the HG extensions along with the Harley forward boards. No way do I want to experience what you did!
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.