Power Vision help....

Reply Subscribe

Thread Tools

Search this Thread

May 11, 2013 | 09:13 AM

#11

Sam2010

Outstanding HDF Member

Joined: Aug 2009

Posts: 2,858

Likes: 217

From: Puyallup Wa.

Jack crap needs to do his home work. Its not Rocket science any basic combo as that is a good starting point.

May 11, 2013 | 03:19 PM

#12

Bushy

Road Warrior

Joined: Jan 2006

Posts: 1,640

Likes: 9

From: Staten island NY

PV has a auto tune but you still need a base to start... check the web page and see whats close.. my auto tune of a download given by fuel motto is unbelievable!!!

May 11, 2013 | 11:13 PM

#13

cbi1000

Thread Starter

Advanced

Joined: Jun 2011

Posts: 60

Likes: 0

From: Oregon

Thanks for all the help. I am we'll on my way. I should say I have installed a map that seems close. I have not ran an auto tune yet.

New issue, bike is running very very hot now. I took it out for like an hour and she is hot! Hotter than before. I think something is wrong with the map, or my install of the exhaust. I thought this was to make it run cooler.

Any ideas?

May 12, 2013 | 04:54 AM

#14

Keithhu

Seasoned HDF Member

Joined: Sep 2009

Posts: 17,155

Likes: 6,177

From: SE Michigan

The PV can display engine temps, do your tuning runs and watch what the temps are.

May 12, 2013 | 05:52 AM

#15

gja

Road Captain

Joined: Sep 2009

Posts: 526

Likes: 99

From: Merrimack NH

Sounds like it may be a map to improved fuel mileage. Less fuel=more heat, running lean.

Tried to send my map this morning, but couldn't see a way to attach to the PM. Send me your email and I'll ship out my map, unless someone chimes in and tells me how to send an attachment in a PM.

May 12, 2013 | 08:40 AM

#16

oldhippie

Stellar HDF Member

Joined: Jun 2007

Posts: 2,928

Likes: 118

From: Ashby, Ma

Make sure you're starting with a True Duals base map

May 12, 2013 | 08:53 AM

#17

Tired

Grand HDF Member

Joined: May 2010

Posts: 3,599

Likes: 5,175

From: SWMO

Seriously man, read the directions. Autotune the stock map. Get your VE.s blended out. If it seems a bit hot to you, richen up your AFR a bit and try it. You bought the tool to do that with. It isn't that difficult. You can do it.