Shifter position moved
Thread Starter
|
Outstanding HDF Member
Joined: Aug 2008
Posts: 3,078
Likes: 6
From: Michigan
Shifter position moved
I hit a big crown in the road doing about 60 and still accelerating, got some good air, but when I came down I musty have mashed the shifter, the toe shifter is now too low to get my toe under, the next day the hiem joint broke, so I relaced the linkage with the stock one, toe shifter is still low. Did I screw something up internally, or just need to readjust the shift lever?
Grand HDF Member
Joined: Dec 2007
Posts: 4,999
Likes: 55
From: Bay Area
If it slipped a tooth as you say which is probably the case, the splines on the shifter arm are probably toast because that metal is softer than the hardened splined shaft, and you should replace the arm when you get a chance or it will continually be slipping out of adjustment. The stock heim joints are garbage, theyre plastic, consider getting aftermarket ones.
Thread
Thread Starter
Forum
Replies
Last Post
