I ride a 04 roadking classic and used my security system for the first time is a while last week. Ever since then, when I ride the security light (little red key) comes on after I start the bike and stays on while I'm riding. I've tried turning it off and on a number of times. Anybody have a idea what's going on with it?

Thanks for sharing your experience and knowledge

john

 

Damn John, you have been here since Oct 09 and you only have 5 posts? You must of got REALLY lost on the first few rides, lmao... Check and see if your bike has codes stored.
I am attaching a link that explains how to do this and it explains the codes. I am sure I am prolly wrong but it dont hurt for you to have this info.
https://www.hdforums.com/forum/dyna-...lear-them.html

I found this on the forums also. It says the red key staying on is related to the turn signals and will stay on when there is a short in the wiring.

https://www.hdforums.com/forum/dyna-...-stays-on.html

Here is another thread saying its related to a short also, check your turnsignal wiring man. Hope this helps you.

https://www.hdforums.com/forum/sport...-stays-on.html

I would invest in a service/electrical manual for that beast to, best 120 bucks you will EVER spend on your ride. Stay safe man.

 

Thanks for the info...and more importantly....
Thanks for your service!! Stay safe!

 

The security key is controlled by a module call the TSSM turn signal security module.

If you have LED lights that would give it some trouble in which case a load equalizer would be the fix. Badlands makes the best one.

 

NP man, thanks for the thanks, good luck fixing your sled.

 

I had the same thing happen and replaced the TSSM with a TSM. The dealer will need to marry the ECM to the new TSM.

 

I haven't had any problems running it, what can happen if I just get used to the light being on?