Help diagnosing please...Pic inside
Thread Starter
|
Tourer
Joined: Sep 2012
Posts: 439
Likes: 8
From: Japan
Help diagnosing please...Pic inside
I'm in the middle of changing out my stock headers to the FM 2/1/2. Upon inspection I found this build up on the the valves.
I'm guessing this is due to a lean condition?
Some help educating please! Other than a new tune from FM for my PV is there anything else I need to do? Thanks!
Ps- the bike has about 7k miles on it.
I'm guessing this is due to a lean condition?
Some help educating please! Other than a new tune from FM for my PV is there anything else I need to do? Thanks!
Ps- the bike has about 7k miles on it.
Last edited by nirschl; Sep 21, 2013 at 01:35 AM.
Thread Starter
|
Tourer
Joined: Sep 2012
Posts: 439
Likes: 8
From: Japan
Ok, did some reading and have a better idea now. It seems this is a normal occurance on the rear cylinder due to heat. I did not post a pic of the front cylinder. I need to take a look when I get home and see how that is.
Thread
Thread Starter
Forum
Replies
Last Post
jurob
Ignition/Tuner/ECM/Fuel Injection
3
Jun 26, 2010 11:35 AM
