Multi part question. Bars/forks
Ultimate HDF Member
Joined: Mar 2012
Posts: 6,129
Likes: 143
From: Santa Cruz
Wow, still working on the bars?? I don't feel too bad taking 2 months to put front wheel and fender on... Are ya doing the forks too?? I'd look on ebay for some exchange lowers. Racetech springs are much better than progressive springs! I'd also look at gold valves or better yet Ricor valves; https://www.hdforums.com/forum/touri...rk-better.html
Good luck!
Good luck!
Last edited by 0ldhippie; Jan 11, 2014 at 02:02 PM.
Thread Starter
|
Tourer
Joined: Mar 2010
Posts: 274
Likes: 3
From: Portage, IN
Two weeks ago I pulled it apart...stock bars off in 25 minutes...wire harness kit was short two wires. Been waiting on those...with the bad weather we had last week we did not get mail except the last couple days...ran wires in bars last night...now mounting today...
Thread Starter
|
Tourer
Joined: Mar 2010
Posts: 274
Likes: 3
From: Portage, IN
No...I got all 17 and they are wired now...in the repair manual it shows the standard 12wires...the other 5 are for cruise...left control two wires to the on/off switch and the right control has three for the set/resume switch..
Thread Starter
|
Tourer
Joined: Mar 2010
Posts: 274
Likes: 3
From: Portage, IN
Advanced
Joined: Jan 2009
Posts: 58
Likes: 3
Hey guys,
This site has good info. Here are other pages on the site that you might be interested in on a lot of Harley stuff.
http://www.moccsplace.com/harley.htm
This site has good info. Here are other pages on the site that you might be interested in on a lot of Harley stuff.
http://www.moccsplace.com/harley.htm
Thread
Thread Starter
Forum
Replies
Last Post