Ok, I did a bone head and removed my handlebars to install the WO578's. Got the new bars wired easy enough, reinstalled onto the bike, or so everything was going well enough until I started to plug the wiring back in. I can't seem to find where I unplugged the small two pin connector that comes from the "throttle-by-wire" harness. There is a 6 pin and 2 pin connector coming out of that harness, 6 pin easy enough found where I unplugged it and it's good, but I'll be darned if I can find that 2 pin connector. HELP!

 

Are the wires black & white? I believe those are for heated grips if you have them.

 

of course I think I've got the answer to my question by using the "search" function here no the forum, it appears the 2 pin connector with the white and black wire are for heated grips, which I do not have so therefore won't find a place to plug it in.

https://www.hdforums.com/forum/elect...-wiring-3.html

If this is wrong I'd appreciate being told so :-0

Thanks
Pete

 

thanks '05Train, that seems to be the case

 

Yep. Heated grips. Did they same thing

 

The 2 wires are for heated grips only. I cut them off as I will never use them and the damn right side wire pull with 10 wires from the controls and 6 more from the TBW was tight enough!!!!

 

They also work on the snow plow attachment