Dyna beads
Road Master
Joined: May 2008
Posts: 1,065
Likes: 1
From: Madison, WI
Thanks
Tourer
Joined: Sep 2008
Posts: 434
Likes: 1
From: Port St Lucie, FL
Filtered cores do not work with motorcycle valve stems, for automotive only. At least that is what I was told by Innovative Balancing tech support.
P.S. A filterd core is to keep the beads from sticking in the valve stem when checking, or releasing air from tire - I find it best to just rotate the tire so the valve stem is higher than the 10 or 2 o'clock position before checking air pressure or adding air.
P.S. A filterd core is to keep the beads from sticking in the valve stem when checking, or releasing air from tire - I find it best to just rotate the tire so the valve stem is higher than the 10 or 2 o'clock position before checking air pressure or adding air.
Last edited by NAUIdvr1; Aug 1, 2010 at 04:01 PM.
Thread Starter
|
Road Master
Joined: Jun 2009
Posts: 1,078
Likes: 1
From: southern maine
Filtered cores do not work with motorcycle valve stems, for automotive only. At least that is what I was told by Innovative Balancing tech support.
P.S. A filterd core is to keep the beads from sticking in the valve stem when checking, or releasing air from tire - I find it best to just rotate the tire so the valve stem is higher than the 10 or 2 o'clock position before checking air pressure or adding air.
P.S. A filterd core is to keep the beads from sticking in the valve stem when checking, or releasing air from tire - I find it best to just rotate the tire so the valve stem is higher than the 10 or 2 o'clock position before checking air pressure or adding air.
Thread
Thread Starter
Forum
Replies
Last Post
