Mods
night rod special mods
so far just new chrome covers backrest and rack ..vance n hines pro 2n exhaust ,air box cover, my next mod is im looking to move the lisence plate down by the shock but im having trouble where to mount signals i wish it wasnt all one assembly and i cannot find any info on the net from someone who has done this with the 2012 model..any one got any input 
Road Captain
Joined: Nov 2009
Posts: 690
Likes: 0
From: B-More ,Md
My Best and most used mod is the Dual Shifter I did. It's nice to be on Forward pegs and be able to shift . But I have Slips,PCV,Open K&N, Arnotts , mirrors, Bars,grips,levers,all pegs a few other add-ons.
Want to Darken it some more and get new wheels ,maybe a 2into1 down the road.
KL go over to 1130cc.com there are many options to run signals . I have put my Plate on the shock and removed the Dogass on mine found a set of brackets that move the signals mid fender and give a float type effect on them.
Want to Darken it some more and get new wheels ,maybe a 2into1 down the road.
KL go over to 1130cc.com there are many options to run signals . I have put my Plate on the shock and removed the Dogass on mine found a set of brackets that move the signals mid fender and give a float type effect on them.
Last edited by ImNoPrince; Mar 14, 2012 at 08:40 AM.
Stage III
Joined: Jan 2012
Posts: 3
Likes: 0
From: Canada
I've done cams , stacks, tuner, bigger injectors, airbox and filter, and V&H 2 into 1 race exhaust. I havn't even picked it up from the dealer yet.....come on summer!!!!!! I hope the stock clutch holds up but i have a funny feeling i'm gonna be doing that as well ....can't wait till they put that baby on the dyno....numbers to follow!!!! This is all on a night rod speacial...I have to black it out a lil more tho, shifter and levers and such.
Tourer
Joined: Apr 2010
Posts: 376
Likes: 0
From: OC NY
I just cut my license plate bracket off. I hated the look of the license plate covering my 250 tire I have the side/vertical plate mount.
I have the side/vertical plate mount.so far just new chrome covers backrest and rack ..vance n hines pro 2n exhaust ,air box cover, my next mod is im looking to move the lisence plate down by the shock but im having trouble where to mount signals i wish it wasnt all one assembly and i cannot find any info on the net from someone who has done this with the 2012 model..any one got any input
Last edited by jeffc68; Mar 25, 2012 at 08:27 AM.
Cruiser
Joined: Jan 2011
Posts: 214
Likes: 0
From: kentucky
I've got SE stage 2 cams, SE 58mm destroyer throttle bodies, SE destroyer injectors, topless air box with SE filter, mid length velocity stacks, SE pro super tuner, Vance & Hines competition series 2-1 exhaust, HD tribal grips,pegs, and mirrors, HD axle covers. Bike made 141hp/95tq on the dyno.
Road Master
Joined: Sep 2011
Posts: 771
Likes: 15
From: Cartersville, Georgia
Minimal mods .... 200 Rear, Bub 7, Topless, K&N, Fuel Moto EFI Tuner, FWD controls, Sundowner, low sissy bar upright and luggage rack ... it will do until I sell/trade for a 103 Street Glide.
Thread
Thread Starter
Forum
Replies
Last Post
ryderbiker
Dyna Glide Models
31
Apr 4, 2011 02:08 PM
jmpancoast
Dyna Glide Models
14
Mar 17, 2008 10:54 PM
