Mag conversion with abs.
Thread Starter
|
Stage IV
Joined: Aug 2020
Posts: 4
Likes: 0
From: Los Angeles
Mag conversion with abs.
Hey fam,
I have a 16 street bob with abs. I want to put mags on them. I’ve done a lot of research but I guess I just don’t get it. I know that I have 25mm bearings.
1. can I get any mags that have a bore of 25mm and just replace the bearings to abs?
2. Do I need spacers?
i am just so lost at this. Sometimes I wish I had gotten a low rider s from the get go. I’ve invest to much on my street bob. Just to give up for some wheels.
someone educate me.
I have a 16 street bob with abs. I want to put mags on them. I’ve done a lot of research but I guess I just don’t get it. I know that I have 25mm bearings.
1. can I get any mags that have a bore of 25mm and just replace the bearings to abs?
2. Do I need spacers?
i am just so lost at this. Sometimes I wish I had gotten a low rider s from the get go. I’ve invest to much on my street bob. Just to give up for some wheels.
someone educate me.
Road Warrior
Joined: Dec 2008
Posts: 1,999
Likes: 916
From: Madisonville, La
Is there another Dyna series bike with mags? If so and the forks have the same width dimension you'll need to talk to a competent parts person to get the spacers to fit your conversation.
Thread
Thread Starter
Forum
Replies
Last Post
