tool bag
Thread Starter
|
Outstanding HDF Member
Joined: Mar 2007
Posts: 2,379
Likes: 1
From: England via the US
tool bag
Accidently posted this in the general forum also. I am looking for a lower frame mounted tool bag for my '06 SB to put a small tool kit in. The only one in the Harley catalog is a little pricey. Any suggestions
Cruiser
Joined: Feb 2007
Posts: 171
Likes: 0
From: Hong Kong via Australia
RE: tool bag
don't know if you have these in the US but get some kind of welder's bag. i am not sure how the hardware shops are laid out there but you might need to go to the carpentry supplies section and possible look for some kind of tradesman's bag and adapt it.
Tourer
Joined: Nov 2007
Posts: 419
Likes: 1
From: Boston
Trending Topics
Road Captain
Joined: Feb 2007
Posts: 703
Likes: 19
From:
RE: tool bag
This was my solution....although I love the prior post it was a little pricey.....this bag cost me $20 at the dealer.
[IMG]local://upfiles/25257/92950CACADF74A609662AAEC5E12FE49.jpg[/IMG]
[IMG]local://upfiles/25257/92950CACADF74A609662AAEC5E12FE49.jpg[/IMG]
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Road Captain
Joined: Feb 2007
Posts: 703
Likes: 19
From:
RE: tool bag
drilled 4 holes in the bag and used 2 zip ties.......i loosened the belt gaurd and put the zip ties around the swing arm and re-tightened the belt gaurd.....less than 30 minutes to install start to finish....