need sissy bar help!
Thread Starter
|
Advanced
Joined: May 2006
Posts: 69
Likes: 0
From:
need sissy bar help!
the lady is starting to complain on the long trips. looks like i need to get the sissy bar now instead of later. i have a dyna bob, and dont want to spend a ton. the dealer could be expensive. any suggestions would help. the only real stipulation is i need it to be tall enough to support a tail bag.
Cruiser
Joined: Jul 2006
Posts: 246
Likes: 0
From: Union City TN
RE: need sissy bar help!
i got this one off of ebay for $25
when i bought it i wasnt for sure if it would fit...but its perfect...It measures 20.5" tall and 8-3/4" wide at the bottom part. Inside bottom measurements are 7-5/8.
Advanced
Joined: Jan 2006
Posts: 99
Likes: 0
From: Hilltown, PA
RE: need sissy bar help!
Glad I found someone talking about the sissy bar! My husband has the Street Bob also! Has anyone tried putting those side plates on that???????????? Oh my god!!!!!!!!!!!!! The bolt that holds the signal light on goes through the inside of the fender and when you "try" to take it out, it hits the tire. We finally figured a way to get it out, (not without of grunting and groaning and swearing). We had to let some air out of the tire. Got the damn sideplate put on and they gave us the wrong one!!!!!!!!!!!!!!!! We had to take it back off! The new ones should be arriving in a couple days and any suggestions on how to put those side plates on an easier way would be much appreciated!
Tourer
Joined: Jan 2006
Posts: 484
Likes: 0
From:
RE: need sissy bar help!
i put mine on last summer, If i remember correctly you can jack the rear of the bike up so the rear tire hangs the bolt will clear. You don't have to lift the bike in so the tire is off the ground just enought to clear the bolt
Advanced
Joined: Jan 2006
Posts: 99
Likes: 0
From: Hilltown, PA
RE: need sissy bar help!
Thank you very much for that advise! Did you fasten the front of the bike down so it wouldn't tip over? We do have a trailer with the wheel chucks in it. Would you recommend fastening the front down so it doesn't tip over?
Outstanding HDF Member
Joined: Jun 2006
Posts: 3,432
Likes: 0
From: SW Ohio
RE: need sissy bar help!
got to unbolt the dang shocks too. bike lift would help. pain in the ol' gulliver !!!!!!!!!!!!!!!
Trending Topics
Tourer
Joined: Jan 2006
Posts: 484
Likes: 0
From:
RE: need sissy bar help!
I didn't and i did't remove the shock either. you should probably fasten the front down, i took a stupid chance but it didn't fall and it all worked out ok. the bolt did touch the top of the tire but it came out and went in with no probems.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Jason Momoa Is Turning Classic Harleys Into PHEVs
Verdad Gallardo
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Cruiser
Joined: Jul 2006
Posts: 246
Likes: 0
From: Union City TN
RE: need sissy bar help!
i just had a buddy lift up on the fender and the bolts went right back in.....
i didnt take the shocks off either ...i also didnt tie the bike down ....did it in the gravel driveway...
propbaly wasnt a smart move ...
i didnt take the shocks off either ...i also didnt tie the bike down ....did it in the gravel driveway...
propbaly wasnt a smart move ...
