2018 Street Bob Forward Controls

Reply Subscribe

Thread Tools

Search this Thread

Feb 18, 2018 | 06:52 PM

#31

beardo

Tourer

Joined: Aug 2008

Posts: 343

Likes: 21

For anyone interested, I'll be selling the main parts of my forwards from my FXFB.

Also be selling my Two Brothers exhaust.

Feb 18, 2018 | 06:54 PM

#32

John Kyle

Cruiser

Joined: Nov 2016

Posts: 178

Likes: 46

From: Wilson, N.C.

Quote:

Originally Posted by beardo

For anyone interested, I'll be selling the main parts of my forwards from my FXFB.

Also be selling my Two Brothers exhaust.

Sent you a pm

Feb 20, 2018 | 07:07 PM

#33

FatBob2018

Grand HDF Member

Joined: Nov 2017

Posts: 4,252

Likes: 3,135

From: Texas

Quote:

Originally Posted by FatBob2018

I found the part and ordered it from Surdyke, $42. I guess we'll find out whether it works or not...

Just as a follow-up, I just got the shift rod and installed it. It works fine, the splines line up perfectly, and yes it wraps around the back of the shift linkage instead of the front, but it's nice glossy black instead of that nasty chrome. It does seem like it needs a little spacer; the spacer that was on the stock Fat Bob control is too thick for it, and it seems a little loose without it, so I'll probably have to try to pick up a different spacer, but other than that, yes you can use the 2016/2017 CVO Pro Breakout shift rod to replace the chrome one on the Fat Bob.

Feb 20, 2018 | 08:45 PM

#34

wkent

Thread Starter

Advanced

Joined: Sep 2017

Posts: 83

Likes: 34

From: Sparks, NV

Great. I did find the Fat Bob spacer to be to thick. If memory serves it needed to be 0.125", I had no way to machine it. That is where the AR-15 crush washer came in handy.

May 9, 2018 | 03:28 PM

#35

Big Twi$t

Stellar HDF Member

Joined: Nov 2007

Posts: 2,307

Likes: 53

From: California

I'll do a swap with someone locally (SoCal).

May 9, 2018 | 06:17 PM

#36

Modo

Cruiser

Joined: May 2009

Posts: 194

Likes: 65

From: 405

Looking for forwards if anyone wants to swap.

May 21, 2018 | 02:42 PM

#37

ekofresh

Stage IV

Joined: May 2018

Posts: 4

Likes: 0

From: nw

Quote:

Originally Posted by wkent

Brake Side
4670 Screw
6237 Washer
11364 O Ring (2)
50600329 Lever, Foot Brake, with 57217-02A (Black)
50600206 Bracket, brake mounting
6702 Washer
7531 Locknut
50500746 Bracket, footpeg mount (Black)

Shifter Side
33900200 Shift Lever (Black)
4017 Screw
7041 Lockwasher
6057 Washer (Nylon)
11191 O Ring (2)
33600134 Bracket, shift lever and footpeg mount, with 33708-94 (black)
33900179 Lever, Shifter IDX (Black)
33600134 Linkage Rod Assembly
4387 Screw
7727 Locknut

Notes:
The 6057 nylon washer was to thick, needed to be .125". Couldn't figure out a way to machine, so substituted for AR15 crush washer. Lowes does have thinner nylon washers but they are white.
I find the brake pedal is a little lower that I would like, can be adjusted. A 9/16" open end spanner with thin jaws is required.
The Parts Guy at my dealer was very helpful, hope yours is the same.

Hello I have extra registered here in the forum. I'm from Germany and would like to have pre-laid footpegs. My question is the parts list really complete or missing a part. I would otherwise order it here in Germany at harley and grow it myself but I have to be sure if everything is complete.