114 build
Seasoned HDF Member
Joined: Dec 2005
Posts: 5,450
Likes: 593
I look forward to seeing your results on the 114. I'm planning on adding a CR480 cam along with a solid tune and see how it does. My goal is at least 1.1hp/CI. Should be achievable, however my pipe is the Two Brothers turnout. It's awfully short. I may need a longer pipe to get there, but it is what was on the bike when I bought it.
The 1.1 hp/ci generally comes out to be a really fun combo without having to lean to hard on compression/hi lift cam etc.
Zach
The 1.1 hp/ci generally comes out to be a really fun combo without having to lean to hard on compression/hi lift cam etc.
Zach
Thread Starter
|
6th Gear
Joined: Apr 2021
Posts: 12
Likes: 3
From: Arizona
I look forward to seeing your results on the 114. I'm planning on adding a CR480 cam along with a solid tune and see how it does. My goal is at least 1.1hp/CI. Should be achievable, however my pipe is the Two Brothers turnout. It's awfully short. I may need a longer pipe to get there, but it is what was on the bike when I bought it.
The 1.1 hp/ci generally comes out to be a really fun combo without having to lean to hard on compression/hi lift cam etc.
Zach
The 1.1 hp/ci generally comes out to be a really fun combo without having to lean to hard on compression/hi lift cam etc.
Zach
also if you havent watched Riding Dad on YouTube go through and watch some of his videos about his TBR pipe. They did have the torque curve but horsepower wise his tuner that he used, that exhaust wasnt too far off on numbers.
Thread
Thread Starter
Forum
Replies
Last Post
HSB
Dyna Glide Models
2
Oct 29, 2009 12:58 PM
