So when I mocked up my system I was pretty happy with the results- Arc Moto 600.4 JL ZR650's in the fairing and JL M770's in SBD lids... While the lids are out for paint, I got to thinking that since I've got the filter on the fairing cutting off the lows, set around 80hz, could I make better use of the Arc's bass boost with the M770's .. accomplished by switching the front to channels 3 & 4 and the rears 1&2?
I planned to run the rears full pass no filter...Thoughts on Bass Boost...

Or should I just leave as is till it's at least warm enough I can actually road test...

 

Leave as is Bro! Bass boost = clipped signal. No need to use it on full range speakers. Those are my thoughts.

 

[QUOTE=Gannicus;15810078]Leave as is Bro! Bass boost = clipped signal. No need to use it on full range speakers. Those are my thoughts.[/QUOTE

Thanks Gan, you were right on the Fast Rings, so I'll trust your guidance on the Bass Boost.

 

Bass boost has 2 banes imo 1. clipped signal and 2. it puts more stress on the amp.

Set the amp on Full Pass for the M770's, it sounds the best imo