Biketronics Amp/Speaker install
Thread Starter
|
Road Captain
Joined: Jul 2007
Posts: 601
Likes: 12
From: Texas
Biketronics Amp/Speaker install
This weekend I spent several hours taking my time installing the Biketronics 2014 AND UP AMPLIFIER & SPEAKER PACKAGE FOR ELECTRA GLIDES with the four channel amp, 7.1 speakers in the fairing, replaced the stock grilles with a set from Hogtunes (which I have a number of their pieces on my '05) and ALPINE SPR-60's in the rear pods.
Donna was extremely helpful in answering questions before I ordered.
Altogether was a relatively simple install, just time consuming as it was the first time taking the fairing off, and getting to the six bottom bolts of the speaker housings was a challenge.
Sitting still, you cant sit on the bike with the volume at half or above - just blows you away. Very clean and clear.
Too much rain in Texas to take her on the road (outside of just riding around the block to make sure nothing fell off that I forgot to put back).
While I did not video, I did take several photos. If someone can tell me how to link the file from photobucket, I'll do that.
Donna was extremely helpful in answering questions before I ordered.
Altogether was a relatively simple install, just time consuming as it was the first time taking the fairing off, and getting to the six bottom bolts of the speaker housings was a challenge.
Sitting still, you cant sit on the bike with the volume at half or above - just blows you away. Very clean and clear.
Too much rain in Texas to take her on the road (outside of just riding around the block to make sure nothing fell off that I forgot to put back).
While I did not video, I did take several photos. If someone can tell me how to link the file from photobucket, I'll do that.
Last edited by cwickgo9; Aug 28, 2017 at 09:03 AM. Reason: add photo
Thread
Thread Starter
Forum
Replies
Last Post
