Having an issue. Headunit resetting
Thread Starter
|
Stage II
Joined: Apr 2017
Posts: 2
Likes: 0
From: Orangeville
Having an issue. Headunit resetting
I've been aying around a bit. I started with an Alpine 73BT head unit connected to a Kenwood maxpower 400w class d amp.
I have added 4 more 6.5" 4ohm speakers all 4 ohm.With that
I added another Kenwood maxpower 400 and bridged both to 90w RMS x 2. One amp powers the front 4 speakers and the other powers the rear 4. Head unit is connected to the amps via RCA Y cables.
The amps are stable to 2ohm and the head unit is 4-8 ohm. The speakers are wired in parallel.
The problem is I get to 1/3 power and the head unit resets. I dont know where the problem lies.
I have added 4 more 6.5" 4ohm speakers all 4 ohm.With that
I added another Kenwood maxpower 400 and bridged both to 90w RMS x 2. One amp powers the front 4 speakers and the other powers the rear 4. Head unit is connected to the amps via RCA Y cables.
The amps are stable to 2ohm and the head unit is 4-8 ohm. The speakers are wired in parallel.
The problem is I get to 1/3 power and the head unit resets. I dont know where the problem lies.
