Looking for more
Thread Starter
|
Intermediate
Joined: Jan 2018
Posts: 27
Likes: 12
From: Michigan
Looking for more
Hello all, I am looking for something warmer. While my current set up is plenty loud. I find it a touch on the high side. My current set up, tx48 massive amp dsr1, Mmatts 601 cx faring, db g2 lowers. Mmatts 601 cx tour pac. Now im not sure if it's the gent that put it in didn't have a clue,which i am leaning on..He kep saying go rf. Any help would be greatly appreciated. Thanks all for your time...
Grand HDF Member
Joined: Sep 2017
Posts: 3,917
Likes: 1,039
From: Southern Virginia
Wesley I'd also say take a look at the tune on your DSP. I figure if I can get a set of the original Motos to sound warm with a tune you should be able to with those Mmats.
To cut your installer some slack everyone's ears are different. Also what sounds good sitting still will require an entirely different tune at 70 mph. I find that the tune that sounds good at highway speed on my sled sounds a little dull sitting still because when I have to crank it up loud to overcome wind noise the mids really push through.
You may have an advantage with your DSR1. I think you can tune that with your phone, so you could mount your phone, select that channel, tweak the EQ curve and ride a bit. Rinse and repeat until you like what you hear.
To cut your installer some slack everyone's ears are different. Also what sounds good sitting still will require an entirely different tune at 70 mph. I find that the tune that sounds good at highway speed on my sled sounds a little dull sitting still because when I have to crank it up loud to overcome wind noise the mids really push through.
You may have an advantage with your DSR1. I think you can tune that with your phone, so you could mount your phone, select that channel, tweak the EQ curve and ride a bit. Rinse and repeat until you like what you hear.
Tourer
Joined: Jun 2012
Posts: 325
Likes: 112
From: Charlotte NC
I can personally attest that it would be worth your ride over to meet up with @Juice. Let him put his ears on it, and I am 100% certain that he will be able to make some adjustments to your tune that will bring your system to an entirely new level. He did for mine... twice now.
Trending Topics
Thread Starter
|
Intermediate
Joined: Jan 2018
Posts: 27
Likes: 12
From: Michigan
I can personally attest that it would be worth your ride over to meet up with @Juice. Let him put his ears on it, and I am 100% certain that he will be able to make some adjustments to your tune that will bring your system to an entirely new level. He did for mine... twice now.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Jason Momoa Is Turning Classic Harleys Into PHEVs
Verdad Gallardo
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Hello all, I am looking for something warmer. While my current set up is plenty loud. I find it a touch on the high side. My current set up, tx48 massive amp dsr1, Mmatts 601 cx faring, db g2 lowers. Mmatts 601 cx tour pac. Now im not sure if it's the gent that put it in didn't have a clue,which i am leaning on..He kep saying go rf. Any help would be greatly appreciated. Thanks all for your time...
I'm running a similar set up.
Mmats PA601.4 cx in the fairing, and DB moto G2's in the lowers off a TX48 with a Dayton DSP. I get a decent sound off the system.
I also run speaker lids off a bridged Stinger, but they get lost in the wind at 80 mph
Thread
Thread Starter
Forum
Replies
Last Post
kuda427
Want To Buy Motorcycles/Parts/Accessories
0
Nov 16, 2015 02:23 AM