RF/Harley Stage 2 problems
Thread Starter
|
Stage I
Joined: Jul 2022
Posts: 1
Likes: 0
From: UT
RF/Harley Stage 2 problems
Hello everybody,
2020 Road Glide Limited
I recently had the Rockford stage 2 (Fairing, Lowers, and Tour Pak) speaker and 2 amps installed. Since the install I have had nothing but issues.
Tour Pak is quick release and only have it on the bike when traveling. When I took it off the system quit working. I could do the set up with the Rockford app and all the white noise and speaker/amp test were good. Took it in to Harley and found the set up had my tour pak and fairing running off the same amp and my lowers on the other. Switched that so the tour pak was on its own and everything started working. A few weeks later I put the tour pak back on everything OK, during the week I was out it would randomly stop working sometimes for hours. Got home took the pak back off and now the system is not working AGAIN. Took it back into Harley and we can not figure out what the problem is. Again all testing comes out good just no sound. It will kick on for a couple of seconds after the bike has sat for an hour or so.
Any help or ideas would be great. Hate to throw that much money in the garbage.
2020 Road Glide Limited
I recently had the Rockford stage 2 (Fairing, Lowers, and Tour Pak) speaker and 2 amps installed. Since the install I have had nothing but issues.
Tour Pak is quick release and only have it on the bike when traveling. When I took it off the system quit working. I could do the set up with the Rockford app and all the white noise and speaker/amp test were good. Took it in to Harley and found the set up had my tour pak and fairing running off the same amp and my lowers on the other. Switched that so the tour pak was on its own and everything started working. A few weeks later I put the tour pak back on everything OK, during the week I was out it would randomly stop working sometimes for hours. Got home took the pak back off and now the system is not working AGAIN. Took it back into Harley and we can not figure out what the problem is. Again all testing comes out good just no sound. It will kick on for a couple of seconds after the bike has sat for an hour or so.
Any help or ideas would be great. Hate to throw that much money in the garbage.
Seasoned HDF Member
Joined: Jul 2017
Posts: 5,749
Likes: 1,603
From: High Point, NC.
Gotta be some connection somewhere not seating completely. Hard to diagnose it online. Hopefully the dealership that installed it should get your squared away soon.
If not, make them take it out, give you your money back and go aftermarket. Cheaper with way better results! Louder and better sq.
If not, make them take it out, give you your money back and go aftermarket. Cheaper with way better results! Louder and better sq.
Thread
Thread Starter
Forum
Replies
Last Post
efilby
General Topics/Tech Tips
0
Jan 15, 2012 06:01 AM
