2" Round Bluetooth Controller...
Thread Starter
|
Intermediate
Joined: Mar 2021
Posts: 29
Likes: 5
From: Phoenix, Az
2" Round Bluetooth Controller...
Hey all,
I'm trying to find a bluetooth receiver/controller that will fit in the existing Air Temp gauge location in my fairing. I believe it is a 2" hole. I've seen these around, but for the life of me, can not find anything now. I need it to receive the bluetooth from my phone, and have the RCA outputs to control the amplifier I'm planning on installing to run my faring (and future lower fairing) speakers. If any of you all can help, it would be greatly appreciated.
I'm trying to find a bluetooth receiver/controller that will fit in the existing Air Temp gauge location in my fairing. I believe it is a 2" hole. I've seen these around, but for the life of me, can not find anything now. I need it to receive the bluetooth from my phone, and have the RCA outputs to control the amplifier I'm planning on installing to run my faring (and future lower fairing) speakers. If any of you all can help, it would be greatly appreciated.
Road Master
Joined: Jul 2005
Posts: 1,118
Likes: 26
From: OOB, Maine
2-3/16" Diameter
https://www.jlaudio.com/products/mbt...receiver-91369
Mounts in 1 -1/8" opening
https://wetsounds.com/ww-bt-dz-wet-s...ne-controller/
Adam
https://www.jlaudio.com/products/mbt...receiver-91369
Mounts in 1 -1/8" opening
https://wetsounds.com/ww-bt-dz-wet-s...ne-controller/
Adam
Last edited by modes; Aug 3, 2022 at 02:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
